Hydraulic Brake System Actuation DTCS
Diagnostics in this article assume a certain skill level and knowledge of Ford-specific diagnostic practices. Refer to Diagnostic Methods in GENERAL INFORMATION for information about these practices.
| DTC | Description | Action |
|---|---|---|
| B1368:11 | Adjustable Pedal Position Feedback Sensor: Circuit Short to Ground | GO to PINPOINT TEST A : THE ADJUSTABLE PEDALS ONLY MOVE IN 1-SECOND INTERVALS . |
| B1368:12 | Adjustable Pedal Position Feedback Sensor: Circuit Short to Battery | GO to PINPOINT TEST A : THE ADJUSTABLE PEDALS ONLY MOVE IN 1-SECOND INTERVALS . |
| B1369:09 | Pedal Adjustment Switch: Component Failure | INSTALL a new adjustable pedals control switch. REFER to Adjustable Pedals Control Switch . TEST the system for normal operation. If the concern still exists, INSTALL a new SCCM. REFER to STEERING COLUMN SWITCHES . |
| B137D:18 | Pedal Adjustment Motor: Circuit Current Below Threshold | GO to PINPOINT TEST B : THE ADJUSTABLE PEDALS ARE INOPERATIVE OR DO NOT OPERATE CORRECTLY -- USING THE ADJUSTABLE PEDALS CONTROL SWITCH |
| B137D:19 | Pedal Adjustment Motor: Circuit Current Above Threshold | GO to PINPOINT TEST B : THE ADJUSTABLE PEDALS ARE INOPERATIVE OR DO NOT OPERATE CORRECTLY -- USING THE ADJUSTABLE PEDALS CONTROL SWITCH |
| B137D:71 | Pedal Adjustment Motor: Actuator Stuck | GO to PINPOINT TEST B : THE ADJUSTABLE PEDALS ARE INOPERATIVE OR DO NOT OPERATE CORRECTLY -- USING THE ADJUSTABLE PEDALS CONTROL SWITCH |
| -- | All Other SCCM DTCs | REFER to STEERING COLUMN SWITCHES . |