LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2019 >> Mustang EcoBoost, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> General Information >> Specifications Index >> Common Specifications & Procedures >> Common Specifications & Procedures
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Common Specifications & Procedures

MUSTANG COMMON SPECIFICATIONS & PROCEDURES

System Specification/Procedure
Air Conditioning
Service Specifications
Torque Refer to appropriate component in Removal And Installation
Battery Specifications
Brakes
Bleeding Sequence Brake System Pressure Bleeding
Disc Brakes w/Torque
Front Refer to appropriate component in Removal And Installation
Rear Refer to appropriate component in Removal And Installation
Charging
Generator w/Torque
2.3L EcoBoost For tightening sequence, refer to Generator - 2.3L Ecoboost (231kW/314PS) .
Generator Bolt and Nut: 18 lb.ft (25 Nm)
5.0L Ti-VCT V8 (331kW/450PS) (MF) For tightening sequence, refer to Generator - 5.0L Ti-VCT V8 (331kW/450PS) (MF) .
Generator Bolt and Nut: 35 lb.ft (47 Nm)
5.2L 32V Ti-VCT Generator Bolt and Nut: 35 lb.ft (47 Nm)
Drive Belts
Adjustment
2.3L EcoBoost Accessory Drive
5.0L 32V Ti-VCT/5.0L Ti-VCT V8 Accessory Drive
5.2L 32V Ti-VCT Accessory Drive
Belt Routing
2.3L EcoBoost Accessory Drive - Component Location
5.0L 32V Ti-VCT/5.0L Ti-VCT V8 Accessory Drive - 10-Speed Automatic Transmission - 10R80 - Component Location or Accessory Drive - 6-Speed Manual Transmission - MT82 - Component Location
5.2L 32V Ti-VCT Accessory Drive - Component Location
Engine Cooling
General Service Specifications
2.3L EcoBoost (231kW/314PS) Specifications
5.0L Ti-VCT V8 (308kW/418PS) Specifications
5.2L 32V Ti-VCT Specifications
Radiator Cap Pressure 21.0 psi (145 kPa)
Thermostat R & I
2.3L EcoBoost (231kW/314PS) Thermostat Housing .
5.0L Ti-VCT V8 (308kW/418PS) Thermostat
5.2L 32V Ti-VCT Thermostat
Water Pump R & I
2.3L EcoBoost (231kW/314PS) Coolant Pump
5.0L Ti-VCT V8 (308kW/418PS) Coolant Pump
5.2L 32V Ti-VCT Coolant Pump
Engine Mechanical
2.3L EcoBoost (231kW/314PS)
Compression Specifications
Oil pressure (hot @ 2, 000 rpm) 29-60psi (200-414kPa)
Overhaul Specifications
Torque Refer to appropriate component in Removal And Installation
5.0L Ti-VCT V8 (308kW/418PS)
Compression Specifications
Oil pressure @ idle with engine at normal operating temperature
Oil pressure @ 2, 000 rpm with engine at normal operating temperature		 10-15 psi (69-103 kPa)
30-40 psi (207-276 kPa)
Overhaul Specifications
Torque Refer to appropriate component in Removal And Installation
5.2L 32V Ti-VCT
Compression Specifications
Oil pressure @ idle with engine at normal operating temperature
Oil pressure @ 2, 000 rpm with engine at normal operating temperature		 10-15 psi (69-103 kPa)
30-40 psi (207-276 kPa)
Overhaul Specifications
Torque Refer to appropriate component in Removal And Installation
Fluid Specifications See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button.
Flywheel/Flex Plate Torque
2.3L EcoBoost (231kW/314PS) For tightening sequence, refer to Flexplate or Flywheel
Flexplate:
  1. Stage 1: 37 lb.ft (50 Nm)
  2. Stage 2: 59 lb.ft (80 Nm)
  3. Stage 3: 83 lb.ft (112 Nm)

Flywheel:
  1. Stage 1: 37 lb.ft (50 Nm)
  2. Stage 2: 59 lb.ft (80 Nm)
  3. Stage 3: 83 lb.ft (112 Nm)
5.0L Ti-VCT V8 (308kW/418PS) For tightening sequence, refer to Flexplate or Flywheel
Flexplate:
  1. Stage 1: 43 lb.ft (58 Nm)
  2. Stage 2: 45°

Flywheel:
  1. Stage 1: 28 lb.ft (38 Nm)
  2. Stage 2: 90°
5.2L 32V Ti-VCT For tightening sequence, refer to Flywheel
  1. Stage 1: 89 lb.in (10 Nm)
  2. Stage 2: 177 lb.in (20 Nm)
  3. Stage 3: 59 lb.ft (80 Nm)
Fuel System
Fuel Filter Location If equipped, Located in fuel tank as part of the fuel pump module.
If equipped, Right rear, near fuel tank snapped in bracket.
Fuel Filter R & I
2.3L EcoBoost (231kW/314PS) Fuel Pump And Sender Unit or Fuel Filter
5.0L Ti-VCT V8 (308kW/418PS) Fuel Pump And Sender Unit or Fuel Filter
5.2L 32V Ti-VCT Fuel Filter
Pressure Release Procedure
2.3L EcoBoost (231kW/314PS) Fuel System Pressure Release
5.0L Ti-VCT V8 (308kW/418PS) Fuel System Pressure Release
5.2L 32V Ti-VCT Fuel System Pressure Release
Pressure Specification
2.3L EcoBoost (231kW/314PS) Engine running - 2.3L GTDi (Low pressure side): 50.8-75.4 psi (350-520 kPa)
5.0L Ti-VCT V8 (308kW/418PS) Engine running - 5.0L Ti-VCT(Low pressure side): 50.8 -75.4 psi (350 -520 kPa)
5.2L 32V Ti-VCT Engine running - 5.2L Ti-VCT(Low pressure side): 53.1 -75.0 psi (366 -517 kPa)
Fuel Pressure Test Procedure
2.3L EcoBoost (231kW/314PS) Fuel System Pressure Check
5.0L Ti-VCT V8 (308kW/418PS) Fuel System Pressure Check
5.2L 32V Ti-VCT Fuel System Pressure Check
Ignition
Firing Order & Cylinder Identification Firing Order & Cylinder Identification
Ignition Wire Resistance Engine has coil-on-plug ignition.
Spark Plugs
2.3L EcoBoost
Type CYFS 12Y PCT
Gap 0.0295 in (.75 mm)
Torque 106 lb.in (12 Nm)
5.0L Ti-VCT V8 (308kW/418PS)
Type CYFS 12Y T6
Gap 0.049-0.053 in (1.25-1.35 mm)
Torque 128 lb.in (14.5 Nm)
5.2L 32V Ti-VCT
Type CYFS 12F 1
Gap 0.049-0.053 in (1.25-1.35 mm)
Torque 133 lb.in (15 Nm)
Starting
Starter w/Torque
2.3L EcoBoost Starter Motor Mounting Stud Bolts: 35 lb.ft (47.5 Nm)
5.0L Ti-VCT V8 (308kW/418PS) 10-Speed Automatic Transmission - 10R80: Starter Motor Mounting Bolts: 35 lb.ft (47.5 Nm)
6-Speed Manual Transmission - MT82: Starter Motor Mounting Stud Bolts: 18 lb.ft (25 Nm)
5.2L 32V Ti-VCT Starter to engine mounting bolts: 18 lb.ft (25 Nm)
Starter bracket to engine mount bolt: 41 lb.ft (55Nm)
Wheel Alignment
Adjustment Specifications Specifications
Torque Refer to appropriate component in General Procedures
Wheel & Tire
Wheel Lug Nut Torque For tightening sequence, refer to Wheel And Tire .
150 lb.ft (204 Nm)
scientia non olet · About LEMON Manuals