LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2019 >> Taurus SHO >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System >> Specifications >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

Description Nm lb-ft lb-in
A/C compressor bolts 25 18 --
A/C compressor fitting nuts (suction and discharge) 15 -- 133
A/C compressor mounting stud 9 -- 80
A/C compressor nut 25 18 --
Condenser bolts -- 3.5L Ti-VCT 6 -- 53
Condenser bolts -- 2.0L, 3.5L Gasoline Turbocharged Direct Injection(GTDI) 8 -- 71
Condenser fitting nuts (inlet and outlet) 15 -- 133
Cross-vehicle beam nuts 30 22 --
Evaporator inlet line fitting nut 15 -- 133
Evaporator outlet line fitting nut 15 -- 133
Floor duct adapter bolts 9 -- 80
Heater core and evaporator core housing bolts 9 -- 80
High-pressure Schrader-type valve 2.5 -- 22
High-pressure service gauge port valve cap 0.8 -- 7
Low-pressure Schrader-type valve 1.8 -- 16
Low-pressure service gauge port valve cap 0.8 -- 7
Radiator bracket bolts 9 -- 80
Receiver/drier bolt 9 -- 80
Receiver/drier outlet fitting nut 15 -- 133
Roll restrictor bracket bolt 48 35 --
Thermostatic Expansion Valve(TXV) bolts 8 -- 71
TXV fitting nut 8 -- 71
TXV manifold and tube bracket bolt 15 -- 133
TXV manifold and tube clamp bracket bolt 9 -- 80
Strut tower brace nuts 30 22 --