Parking Aid System DTCS: Visual: BCM
| DTC | Description | Action |
|---|---|---|
| B115E:01 | Camera Module: General Electrical Failure | DTC B115E:01 sets in the BCM when the video camera status indicates corrupted data with in the video camera. CLEAR the DTCs. REPEAT the self-test. If DTC B115E:01 is retrieved again, INSTALL a new video camera. REFER to Video Camera . |
| B115E:08 | Camera Module: Bus Signal/Message Failure | If the rear video is displayed on a 106.68 mm (4.2 in) centerstack infotainment display, GO to Pinpoint Test E
. For all other video displays, GO to Pinpoint Test A . |
| B115E:49 | Camera Module: Internal Electronic Failure | CLEAR the DTCs. REPEAT the self-test. If DTC B115E:49 is retrieved again, INSTALL a new video camera. REFER to Video Camera . |
| B115E:55 | Camera Module: Not Configured | DTC B115E:55 sets in the BCM when the video camera is not configured. The video camera needs to be configured through the BCM. CARRY OUT the "LIN new module initialization" for the video camera using the scan tool. |
| All other DTCs | -- | REFER to the DTC Charts in Multifunction Electronic Modules . |