| B108A:01 |
Start Button: General Electrical Failure |
GO to Pinpoint Test J
. |
| B1142:29 |
Ignition Status 1: Signal Invalid |
GO to Pinpoint Test J
. |
| B1240:11 |
Start Button Mode Indicator: Circuit Short to Ground |
GO to Pinpoint Test I
. |
| B1240:15 |
Start Button Mode Indicator: Circuit Short to Battery or Open |
GO to Pinpoint Test I
. |
| B1310:12 |
Run/Start Control: Circuit Short to Battery |
GO to Pinpoint Test O
. |
| B1310:14 |
Run/Start Control: Circuit Short to Ground or Open |
For vehicles equipped with an ignition switch, GO to Pinpoint Test C
. For vehicles equipped with a start/stop switch, GO to Pinpoint Test E
. |
| U300A:01 |
Ignition Switch: General Electric Failure |
GO to Pinpoint Test A
. |
| All other BCM DTCs |
-- |
REFER to Multifunction Electronic Modules
. |