Normal Operation and Fault Conditions
With the ignition ON, the IPMA sends messages to the ABS module over the HS-CAN 2. If the ABS module does not receive these messages within the specified time frame, the module sets a DTC. This can be due to an IPMA failure, a circuit failure on the network or an excessive load on the network. For information on the messages sent to the ABS module by the IPMA, refer to the Network Message Chart in Description and Operation of the Anti-Lock Brake System (ABS) and Stability Control article. On vehicles equipped with adaptive cruise control, the CCM communicates with the ABS module through the IPMA, the CCM and the IPMA communicate over a private CAN.
PPT BQ ABS MODULE DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U023A:00 | Lost Communication with Image Processing Sensor A: No Sub Type Information | This DTC sets in the ABS module when the adaptive cruise control data message from the IPMA is missing for more than the alloted time. |
| U053B:00 | Invalid Data Received From Image Processing Module A: No Sub Type Information | This DTC sets in the ABS module when the collision mitigation by braking data messages from the IPMA contain invalid data. |