Pinpoint Test CZ : BCMC (Body Control Module C) Concerns

NOTE: The Inverter System Controller (ISC) is referred to as the SOBDMC (Secondary On-Board Diagnostic Control Module C) in the scan tool.

Normal Operation and Fault Conditions

When specific Diagnostic Trouble Codes (DTCs) are set by the BCMC, corresponding Diagnostic Trouble Codes (DTCs) are also set in the SOBDMC. These Diagnostic Trouble Codes (DTCs) do not indicate a concern with the SOBDMC. To clear the SOBDMC Diagnostic Trouble Codes (DTCs) in question, diagnose the corresponding BCMC concern.

REFER to: Climate Control System - Vehicles With: Dual Automatic Temperature Control (DATC)/Electronic Automatic Temperature Control (EATC) .

DTC Fault Trigger Conditions

DTC	Description	Fault Trigger Condition
SOBDMC P0EE3:00	A/C Refrigerant Distribution Valve "B" Control Circuit/Open: No Sub Type Information	An HVAC concern has been identified by the BCMC. To clear this SOBDMC DTC, diagnose the corresponding BCMC concern.
SOBDMC P0EE4:00	A/C Refrigerant Distribution Valve "B" Control Circuit Low: No Sub Type Information	An HVAC concern has been identified by the BCMC. To clear this SOBDMC DTC, diagnose the corresponding BCMC concern.
SOBDMC P0EE5:00	A/C Refrigerant Distribution Valve "B" Control Circuit High: No Sub Type Information	An HVAC concern has been identified by the BCMC. To clear this SOBDMC DTC, diagnose the corresponding BCMC concern.

Possible Sources

BCMC concerns

Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods