DTC P0604 (PCM) - Internal Control Module Random Access Memory (RAM) Error
DTC DESCRIPTION P0604 (PCM) - INTERNAL CONTROL MODULE RANDOM ACCESS MEMORY (RAM) ERROR
| Description: This DTC sets when the PCM RAM has been corrupted. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Make sure to check for aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming the VID Block for a Replacement PCM. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||