DTC U1010 - Invalid Internal Control Module Monitoring Data Received From SOBDMC

DTC DESCRIPTION U1010 - INVALID INTERNAL CONTROL MODULE MONITORING DATA RECEIVED FROM SOBDMC

Description: Network DTC concerns occur during module to module communication.
Possible Causes: Invalid data network concerns - data is transferred within the normal inter-module message, but contains known invalid data. The transmitting module logs a DTC related to the invalid data concern. Missing message network concerns - missing message concerns are logged by the module upon failure to receive a message from another module within a defined retry period.
Diagnostic Aids: This DTC sets if the signed output shaft speed signal from the SOBDMC is not valid. Check for other SOBDMC DTCs or SOBDMC related symptoms. Diagnose all other SOBDMC DTCs or SOBDMC related symptoms first.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST QA .