DTC U0557: Invalid Data Received From Front Controls Interface Module "A": Action

This DTC sets if the SECM receives invalid data from the FCIM. Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all FCIM DTCs. REFER to the appropriate Information and Entertainment System article. If the diagnostic scan tool cannot communicate with the FCIM, REFER to Module Communications Network article. If no DTCs are set in the FCIM, the concern may be intermittent. SET the ignition to OFF. DISCONNECT and INSPECT all FCIM electrical connectors and related inline connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.