DTC P064D - Internal Control Module O2 Sensor Processor Performance (Bank 1)
DTC DESCRIPTION P064D - INTERNAL CONTROL MODULE O2 SENSOR PROCESSOR PERFORMANCE (BANK 1)
| Description: | The PCM monitors the application specific integrated circuit that controls and monitors the universal heated oxygen sensor bank 1, sensor 1 (HO2S11). This DTC sets when the PCM detects an internal circuit or communication concern. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Check for other DTCs and diagnose those first. Check for intermittent universal HO2S wiring concerns. Check the universal HO2S wiring between the PCM and the sensor for damage. Check for aftermarket performance products. Reprogram or update the calibration. Clear the DTCs, repeat the self-test. If the DTC is retrieved again, install a new PCM. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) . |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DZ . | ||