Normal Operation and Fault Conditions
The ABS module monitors various inputs and compares the values to what should be expected. If the values received are out of range or not what is expected, the ABS module sets a DTC. When a new ABS module or RCM is installed, the stability control sensors in the RCM must be initialized. This is accomplished using a diagnostic scan tool to run the ABS Calibration routine.
PPT AN ABS MODULE DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| C0061:54 | Lateral Acceleration Sensor: Missing Calibration | Sets when the ABS module detects the stability sensors in the RCM have not been calibrated or the calibration has been lost. |
| C0062:54 | Longitudinal Acceleration Sensor: Missing Calibration | Sets when the ABS module detects the stability sensors in the RCM have not been calibrated or the calibration has been lost. |