Pinpoint Tests Purpose

To verify PSCM DTC P160C is present and provide diagnostics if DTC P160C is currently active in the PSCM.

1. W1: CHECK FOR OVERHEATING DTC 
   • Ignition ON, engine OFF.
   • Clear the PSCM DTCs.
   • Ignition OFF.
   • Wait at least 90 seconds for the modules to completely shut off.
   • Start the vehicle.
     • Make sure the engine ready indicator is illuminated for hybrid vehicles.

   Carry out the PSCM self-test.

   • Is DTC P160C:xx present and active in the PSCM? 

     Yes	No
     INSTALL a new EPAS gear. REFER to the Power Steering article. ORDER a replacement EPAS gear and INCLUDE the RVC on the form. If this is a Ford paid repair, INCLUDE the RVC on the warranty claim form.	If the PSCM does not list DTC P160C, DISCONTINUE this test and REFER to the DTC Chart for direction.