The Line Lock Feature Cannot Be Initialized

Possible Source	Action
DTCs present in the ABS module, PCM or PSCM Vehicle is on an incline Engine is not running Selectable driving mode is set to Snow-Wet Vehicle is traveling faster than 40-48 km/h (25-30 mph)	Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all ABS module, PCM and PSCM DTCs. The vehicle must be on a flat surface for Line Lock feature use. MOVE vehicle to a flat surface and ATTEMPT to engage the Line Lock feature. START the engine and ATTEMPT to engage the Line Lock feature. The Line Lock feature cannot be used with Snow-Wet mode selected. SELECT Track mode and ATTEMPT to engage the Line Lock feature. The vehicle cannot be moving when selecting the Line Lock feature. STOP the vehicle and ATTEMPT to engage the Line Lock feature.

Possible Source

Action

Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all ABS module, PCM and PSCM DTCs.
The vehicle must be on a flat surface for Line Lock feature use. MOVE vehicle to a flat surface and ATTEMPT to engage the Line Lock feature.
START the engine and ATTEMPT to engage the Line Lock feature.
The Line Lock feature cannot be used with Snow-Wet mode selected. SELECT Track mode and ATTEMPT to engage the Line Lock feature.
The vehicle cannot be moving when selecting the Line Lock feature. STOP the vehicle and ATTEMPT to engage the Line Lock feature.