P0602 - Powertrain Control Module Programming Error
DTC DESCRIPTION P0602 - POWERTRAIN CONTROL MODULE PROGRAMMING ERROR
| Description: | This DTC sets when there is a programming error within the vehicle identification (VID) block. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Program the VID block. Refer to Flash Electrically Erasable Programmable Read Only Memory (EEPROM), Making Changes to the VID Block. If the PCM does not allow reprogramming of the VID block, reflashing of the PCM is required. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to Pinpoint Test QA. | ||