LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2021 >> Edge ST-Line, FWD >> Repair and Diagnosis >> Steering >> Steering Column >> Removal And Installation >> Steering Column Tilt Motor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Column Tilt Motor: Installation

  1. To install, reverse the removal procedure.
  2. If equipped with memory steering column, use the steering column control switch and set the tilt motor soft stops as follows.

    1. Move the column upward until it reaches the end of travel.
    2. Move the column in the same direction until it reaches the end of travel again.
    3. Move the column downward until it reaches the end of travel.
    4. Move the column in the same direction until it reaches the end of travel again.

    GFD593224Courtesy of FORD MOTOR COMPANY

  3. If equipped with memory steering column, use the steering column control switch and set the telescopic motor soft stops as follows.

    1. Move the column rearward until it reaches the end of travel.
    2. Move the column in the same direction until it reaches the end of travel again.
    3. Move the column forward until it reaches the end of travel.
    4. Move the column in the same direction until it reaches the end of travel again.

GFD593225Courtesy of FORD MOTOR COMPANY

scientia non olet · About LEMON Manuals