DTC U0556: Invalid Data Received From Front Display Interface Module: Action
WARNING: This page is about a different car, the 2021 Ford Transit Connect. However, it is still accessible from the selected car via links, so may be relevant.
This DTC sets if the SECM receives invalid data from the FDIM. Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all FDIM DTCs. REFER to Information and Entertainment Systems article. If the diagnostic scan tool cannot communicate with the FDIM, REFER to Module Communications Network k article. If no DTCs are set in the FDIM, the concern may be intermittent. SET the ignition to OFF. DISCONNECT and INSPECT all FDIM electrical connectors and related inline connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.