Abs Guided Routine - Pinpoint Tests G - ZA
- Pinpoint Tests G: C1020:00
- Pinpoint Tests H: Hydraulic Pump Faults
- Pinpoint Tests I: SASM Module Reset Concern
- Pinpoint Tests J: Abs (Anti-Lock Brake System) Module Communication Concern With SASM (Steering Angle Sensor Module)
- Pinpoint Tests K: SASM Battery Voltage Signal Compare Concern
- Pinpoint Tests L: Brake Fluid Level
- Pinpoint Tests La: Steering Wheel Position Sensor Signal Fault
- Pinpoint Tests Lb: Steering Wheel Position Sensor Faults
- Pinpoint Tests M: Front Wheel Speed Sensor Electrical Faults
- Pinpoint Tests N: Rear Wheel Speed Sensor Electrical Faults
- Pinpoint Tests O: The Traction Control System Is Inoperative Or Cannot Be Disabled Using The Traction Control Switch
- Pinpoint Tests OA: The Hill Descent Control System Is Inoperative, Cannot Be Disabled Or Enabled
- Pinpoint Tests Ob: The SELECTABLE Drive Mode Feature Is Inoperative
- Pinpoint Tests OC: The Snow/Sand Mode Feature Is Inoperative, Cannot Be Disabled Or Enabled
- Pinpoint Tests P: SASM Incompatibility Concern
- Pinpoint Tests Q: Abs Module Communication Concern With TCM
- Pinpoint Tests QA: Abs Module Communication Concern With The TCCM
- Pinpoint Tests R: Abs (Anti-Lock Brake System) Module Communication Concern With Advanced Driver Assistance System (ADAS)
- Pinpoint Tests S: Abs Module Communication Concern With TBM
- Pinpoint Tests T: SASM (Steering Angle Sensor Module) Communication Concern With BCM (Body Control Module)
- Pinpoint Tests U: The Brake Booster Vacuum Pump Is Inoperative
- Pinpoint Tests V: The Brake Booster Vacuum Pump Runs Continuously
- Pinpoint Tests W: Abs Module Communication Concern With HVAC Module
- Pinpoint Tests X: Abs Temperature Too High
- Pinpoint Tests Y: Abs (Anti-Lock Brake System) Module Internal Fault Concern
- Pinpoint Tests Ya: Software Incompatibility With Brake Booster Control
- Pinpoint Tests Z: Abs (Anti-Lock Brake System) Module Configuration Concern
- Pinpoint Tests ZA: Tire Diameter