| P0562:00 |
System Voltage Low: No Sub Type Information |
GO to Pinpoint Test A |
| P0563:00 |
System Voltage High: No Sub Type Information |
GO to Pinpoint Test B |
| P0605:00 |
Internal Control Module Read Only Memory (ROM) Error: No Sub Type Information |
GO to Pinpoint Test H |
| P0606:00 |
Control Module Processor: No Sub Type Information |
GO to Pinpoint Test H |
| P0607:00 |
Control Module Performance: No Sub Type Information |
GO to Pinpoint Test H |
| P06B8:00 |
Internal Control Module Non-Volatile Random Access Memory (NVRAM) Error: No Sub Type Information |
GO to Pinpoint Test H |
| P07EC:00 |
Transmission Range Multi-Function Select Circuit: No Sub Type Information |
GO to Pinpoint Test F |
| P07ED:00 |
Transmission Range Multi-Function Select Circuit Stuck: No Sub Type Information |
GO to Pinpoint Test F |
| P0814:00 |
Transmission Range Display Circuit: No Sub Type Information |
GO to Pinpoint Test C |
| P0915:00 |
Gear Shift Position Circuit "A" Range/Performance: No Sub Type Information |
GO to Pinpoint Test C |
| P0929:00 |
Gear Shift Lock Solenoid/Actuator Circuit "A" Range/Performance: No Sub Type Information |
GO to Pinpoint Test D |
| P0929:77 |
Gear Shift Lock Solenoid/Actuator Circuit "A" Range/Performance: Commanded Position Not Reachable |
GO to Pinpoint Test D |
| P164E:00 |
Internal Control Module Transmission Range Select Performance: No Sub Type Information |
GO to Pinpoint Test H |
| P166B:00 |
Drivers Door Status Correlation: No Sub Type Information |
GO to Pinpoint Test E |
| P1753:00 |
Gear Shift Position Sensor Alignment: No Sub Type Information |
GO to Pinpoint Test C |
| U0100:00 |
Lost Communication With ECM/PCM "A": No Sub Type Information |
GO to Pinpoint Test L |
| U0100:87 |
Lost Communication With ECM/PCM "A": Missing Message |
GO to Pinpoint Test I |
| U0121:00 |
Lost Communication With Anti-Lock Brake System (ABS) Control Module "A": No Sub Type Information |
GO to Pinpoint Test L |
| U0140:00 |
Lost Communication With Body Control Module: No Sub Type Information |
GO to Pinpoint Test L |
| U0155:00 |
Lost Communication With Instrument Panel Cluster (IPC) Control Module: No Sub Type Information |
GO to Pinpoint Test L |
| U0301:00 |
Software Incompatibility with ECM/PCM: No Sub Type Information |
GO to Pinpoint Test J |
| U0401:00 |
Invalid Data Received from ECM/PCM A: No Sub Type Information |
GO to Pinpoint Test M |
| U0422:00 |
Invalid Data Received From Body Control Module: No Sub Type Information |
GO to Pinpoint Test M |
| U1011:00 |
Invalid Internal Control Module Monitoring Data Received from ECM/PCM: No Sub Type Information |
GO to Pinpoint Test K |
| U101F:00 |
Invalid Internal Control Module Monitoring Data Received from Transmission Range Control Module: No Sub Type Information |
GO to Pinpoint Test K |