Front Seats - Overview

WARNING: This page is about a different car, the 2018 Ford F-550 Super Duty, 2018 Ford F-450 Super Duty, 2018 Ford F-350 Super Duty, and 2018 Ford F-250 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.

Overview

Driver Power Seat - Without Memory

The 8-way driver power seat is equipped with the following motors:

Front height motor (serviced with seat track assembly)
Rear height motor (serviced with seat track assembly)
Horizontal motor (serviced separately from the seat track assembly)
Lumbar motor (serviced with power lumbar assembly)

The 10-way driver power seat is equipped with the following motors:

Front height motor (serviced with seat track assembly)
Rear height motor (serviced with seat track assembly)
Horizontal motor (serviced separately from the seat track assembly)
Recliner motor (serviced with seat backrest assembly)
Lumbar motor (serviced with power lumbar assembly)

Driver Power Seat - With Memory

The power driver seat is controlled by the DSM. The DSM is located on the driver seat track. PMI is required when a new DSM is installed. The DSM hard stop/soft stops must be set/reset any time a new DSM, driver seat track or driver seat backrest is installed.

The memory system allows automatic positioning of the driver seat to 1 of 3 programmable positions. For information on programming memory positions or recalling a stored memory position, refer to the Owner's Literature.

The driver memory seat is equipped with the following motors:

Front height motor (serviced with seat track assembly)
Rear height motor (serviced with seat track assembly)
Horizontal motor (serviced separately from the seat track assembly)
Recliner motor (serviced with seat backrest assembly)
Lumbar motor (serviced with power lumbar assembly)

Passenger Power Seat

The 10-way passenger power seat is equipped with the following motors:

Front height motor (serviced with seat track assembly)
Rear height motor (serviced with seat track assembly)
Horizontal motor (serviced separately from the seat track assembly)
Recliner motor (serviced with seat backrest assembly)
Lumbar motor (serviced with power lumbar assembly)

Heated Seats

This system allows on-demand, independent, electrical heating of each front seat.

The heated seat system consists of the following components:

Seat cushion heater mat
Seat backrest heater mat
FCIM (includes heated seat switches)
FDIM (includes heated seat switches)

Climate Controlled Seats

This system allows on-demand, independent, electrical heating/cooling of each front seat.

The climate controlled seat system consists of the following components:

Blower motor, located within each front seat cushion and backrest
Air filter, integrated to each blower motor assembly (not serviceable)
Climate-controlled seat buttons, located on the FDIM (touchscreen)
FCIM
SCME, mounted to the bottom of the front passenger seat
Cushion and backrest manifolds
Cushion and backrest foam pads
Cushion and backrest trim covers

Multi-Contour Seats

This system allows on demand independent lumbar adjustment and/or massage of each front seat. PMI is required when a new SCMG or SCMH is installed.

The multi-contour front seat system consists of the following components:

SCMG, attached to the backrest of the front driver seat
SCMH, attached to the backrest of the front passenger seat
Multi-contour seat buttons, located on the FDIM (touchscreen)
Multi-contour seat control switch (part of the seat control switch)
Front seat cushion adjuster, attached to each front seat frame (includes 4 inflatable air bladders and hoses)
Front seat power lumbar assembly, attached to each front seat backrest (includes air pump, 3 inflatable air bladders and hoses)