Instrument Panel: Installation
- To install, reverse the removal procedure.
- Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding 3.3L Duratec-V6 - Hybrid . Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding 3.3L Duratec-V6 . Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding 3.0L EcoBoost . Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding 2.3L EcoBoost .
-
NOTE: Anytime the parking brake switch electrical connector has been disconnected, the EPB system is deactivated and a DTC is stored in the EPB module. Perform the following step to restore the EPB system and clear the EPB module DTC.
Apply and release the parking brake twice within 5 seconds, pausing with the switch in the NEUTRAL position for approximately one-half second between each apply and release. Using a diagnostic scan tool, clear the EPB module DTC.