LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2021 >> Explorer Timberline >> Repair and Diagnosis >> External Pages >> Different car >> Section 497 (Abs Guided Routine) >> Pinpoint Tests >> Pinpoint Tests C: Brake Booster Vacuum Sensor Faults >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Tests C: Brake Booster Vacuum Sensor Faults: Notes

WARNING: This page is about a different car, the 2020 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Vehicle Dynamic Systems wiring diagrams, for schematic and connector information.

PPT C PCM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
P0555 Brake Booster Pressure Sensor Circuit This DTC sets due to differences between the brake booster mounted vacuum sensor signal and the PCM calculated vacuum level. This DTC does not illuminate any warning indicators nor are there any associated service messages.
P0556 Brake Booster Pressure Sensor Circuit Range/Performance This DTC sets due to differences between the brake booster mounted vacuum sensor signal and the PCM calculated vacuum level. This DTC does not illuminate any warning indicators nor are there any associated service messages.
P0557 Brake Booster Pressure Sensor Circuit Low This DTC sets due to differences between the brake booster mounted vacuum sensor signal and the PCM calculated vacuum level. This DTC does not illuminate any warning indicators nor are there any associated service messages.
P0558 Brake Booster Pressure Sensor Circuit High This DTC sets due to differences between the brake booster mounted vacuum sensor signal and the PCM calculated vacuum level. This DTC does not illuminate any warning indicators nor are there any associated service messages.
P0559 Brake Booster Pressure Sensor Circuit Intermittent This DTC sets due to differences between the brake booster mounted vacuum sensor signal and the PCM calculated vacuum level. This DTC does not illuminate any warning indicators nor are there any associated service messages.
P05FF Brake Pressure Sensor/Brake Pedal Position Sensor Correlation This DTC sets if the information from the brake pressure sensor and brake pedal position sensor do not match. This is most likely due to sensor concerns, wiring harness concerns or vehicle communication concerns.