U030F - Software Incompatibility With Reductant Control Module
DTC DESCRIPTION U030F - SOFTWARE INCOMPATIBILITY WITH REDUCTANT CONTROL MODULE
| Description: This DTC sets when the PCM receives invalid data from the Reductant Dosage Control Module (RDCM). | |||
Possible Causes:
|
|||
| Diagnostic Aids:
Verify the NOx11 module is at the latest calibration level. The presence of this DTC may indicate the vehicle is operating in derate mode and may experience a loss of power. After repair, the vehicle may still display a system warning message. Drive the vehicle until the system warning message has cleared from the instrument panel cluster (IPC) message center. |
|||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST AE . | ||