High Pressure Fuel Contamination System Kit: Replace
WARNING: This page is about the F-250 Super Duty King Ranch, 6.2L Eng VIN 6, 4WD, which is a different variant/trim than selected.
FUEL INJECTION - DIESEL
Includes: Replace the High Pressure Pump, Fuel Rails, all Injectors and Engine Fuel Lines as instructed from the manufacturers service bulletin. For additional component replacement refer to combinations.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| 12.7 | B | |||
| Additional Procedure: HIGH PRESSURE FUEL CONTAMINATION SYSTEM KIT: Replace: | ||||
| w/Skid Plate | 0.2 | B | ||
| Combination Procedure: FUEL CONDITIONING MODULE: Remove & Replace: | ||||
| 0.5 | B | |||
| Combination Procedure: FUEL COOLER: Remove & Replace: | ||||
| 0.4 | B | |||
| Combination Procedure: FUEL FILTER: Remove & Replace: | ||||
| Both | 0.7 | B | ||
| Combination Procedure: FUEL LINES: Flush: | ||||
| w/Dual Tanks | 1.2 | D | ||
| w/o Dual Tanks | 0.9 | D | ||
| Combination Procedure: FUEL LINES: Remove & Replace: | ||||
| Both | 2.6 | B | ||
| Front Tank | 1.1 | B | ||
| Rear Tank | 2.3 | B | ||
| Combination Procedure: FUEL PRESSURE SENSOR: Remove & Replace: | ||||
| One or Both | 0.1 | B | ||
| Combination Procedure: FUEL TANK: Clean: | ||||
| Both | Includes: R&I Fuel Tank. | 5.4 | C | |
| One | Includes: R&I Fuel Tank. | 3.1 | C | |
| Combination Procedure: FUEL TANK FILLER PIPE: Remove & Replace: | ||||
| Both | 0.4 | C | ||
| One | 0.2 | C | ||
| Combination Procedure: FUEL/WATER SEPARATOR SENSOR: Remove & Replace: | ||||
| 0.1 | B | |||