Removal & Installation
WARNING: This page is about the F-250 Super Duty King Ranch, 6.2L Eng VIN 6, 4WD, which is a different variant/trim than selected.
TRANS ID - 6R100, 6R140 TORQSHIFT
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| Gas/Ethanol,4WD | | 9.1 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: OIL COOLER LINES: Flush: |
| | 0.3 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.4 | | C |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| 4WD | | 1.1 | | C |
TRANS ID - A10R80, 10R60, 10R80, 10R100, 10R140
| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|
| 4WD,Gas/Ethanol | | 8.1 | | C |
| Additional Procedure: TRANSMISSION ASSEMBLY: Removal & Installation: |
| w/Skid Plate | | 0.2 | | C |
| Combination Procedure: FLYWHEEL: Remove & Replace: |
| Includes: Validation with use of Scan Tool. | 0.5 | | C |
| Combination Procedure: OIL COOLER LINES: Flush: |
| | 0.3 | | C |
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: |
| | 0.3 | | C |
| Combination Procedure: TORQUE CONVERTER HUB SEAL: Remove & Replace: |
| | 0.3 | | B |
| Combination Procedure: TRANSMISSION ASSEMBLY: Replace: |
| 4WD | Includes: Programming. | 2.3 | | C |