Normal Operation and Fault Conditions
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Lincoln MKZ, 2018 Ford Transit-350 HD, 2018 Ford Transit-350, 2018 Ford Transit-250, and 2018 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
The ABS module receives vehicle yaw rate, lateral acceleration, longitudinal acceleration and roll rate from RCM over the HS-CAN 2. The yaw rate sensor, lateral accelerometer, longitudinal accelerometer and roll rate sensor are all contained in the RCM. A failure of the HS-CAN 2, an internal failure of the RCM or the internal sensors causes the ABS to set one or more DTCs.
PPT AG ABS MODULE DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| C0061:28 | Lateral Acceleration Sensor: Signal Bias Level Out of Range/Zero Adjustment Failure | Sets when the ABS module detects the sensor signal is greater than the programmed maximum plausible sensor signal. |
| C0062:28 | Longitudinal Acceleration Sensor: Signal Bias Level Out of Range/Zero Adjustment Failure | Sets when the ABS module detects the sensor signal is greater than the programmed maximum plausible sensor signal. |
| C0063:28 | Yaw Rate Sensor: Signal Bias Level Out of Range/Zero Adjustment Failure | Sets when the ABS module detects the sensor signal is greater than the programmed maximum plausible sensor signal. |
| C0064:28 | Roll Rate Sensor: Signal Bias Level Out of Range/Zero Adjustment Failure | Sets when the ABS module detects the sensor signal is greater than the programmed maximum plausible sensor signal. |
| C0061:2F | Lateral Acceleration Sensor: Signal Erratic | Sets when the ABS module detects the lateral acceleration sensor signal is out of range when the vehicle is standing still. |
| C0063:2F | Yaw Rate Sensor: Signal Erratic | Sets when the ABS module detects the yaw rate sensor signal is out of range when the vehicle is standing still. |
| C0061:64 | Lateral Acceleration Sensor: Signal Plausibility Failure | Sets when the ABS module detects the sensor signal does not match the other stability sensor signals. |
| C0062:64 | Longitudinal Acceleration Sensor: Signal Plausibility Failure | Sets when the ABS module detects the sensor signal does not match the other stability sensor signals. |
| C0063:64 | Yaw Rate Sensor: Signal Plausibility Failure | Sets when the ABS module detects the sensor signal does not match the other stability sensor signals. |
| C0064:64 | Roll Rate Sensor: Signal Plausibility Failure | Sets when the ABS module detects the sensor signal does not match the other stability sensor signals. |