LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2021 >> GT >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Abs Guided Routine Testing) >> Pinpoint Tests >> Pinpoint Tests AW: SASM Communication Concern With PCM >> Normal Operation and Fault Conditions
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Normal Operation and Fault Conditions

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2018 Lincoln MKZ, 2018 Ford Transit-350 HD, 2018 Ford Transit-350, 2018 Ford Transit-250, and 2018 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition ON, the PCM sends messages to the SASM through the GWM over the HSCAN 2. If the SASM does not receive these messages within a certain time frame (usually less than 1 second), the SASM sets a DTC. For information on the messages sent to the SASM by the PCM, refer to the NETWORK MESSAGE CHART in Description and Operation of Anti-Lock Brake System (ABS) and Stability Control article. 

PPT AW SASM DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U0100:00 Lost Communication With ECM/PCM "A": No Sub Type Information Sets in continuous memory and on-demand when the SASM detects any of the PCM messages are missing. This can be due to a PCM failure, a circuit failure on the HSCAN or an excessive load on the network.