Normal Operation And Fault Conditions
With the ignition ON, the SECM monitors various inputs to detect if a fault is present.
SECM DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | This DTC is pre-set in a new SECM and clears automatically when the SECM is configured correctly. This DTC also sets due to incomplete or improper PMI procedures. |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | This DTC sets due to incomplete or improper PMI procedures. |