Normal Operation And Fault Conditions
With the ignition ON, the IPMA sends messages to the SECM, through the SASM and over the HS-CAN 2. If the SECM does not receive these messages within a certain time frame, the SECM sets a DTC. For information on the messages sent to the SECM by the IPMA, refer to the Network Message Chart in Description and Operation of the Power Steering article.
SECM DTC FAULT TRIGGER CONDITIONS
| DTC | Description | Fault Trigger Conditions |
|---|---|---|
| U023A:00 | Lost Communication With Image Processing Module A: No Sub Type Information | Sets when the SECM detects any of the IPMA messages is missing. This can be due to an IPMA failure, a circuit failure on the HS-CAN2 or an excessive load on the network. |