| P0219:00 |
Engine Overspeed Condition: No Sub Type Information |
GO to Pinpoint Test Z |
| P0297:00 |
Vehicle Overspeed Condition: No Sub Type Information |
GO to Pinpoint Test Z |
| P0642:00 |
Sensor Reference Voltage "A" Circuit Low: No Sub Type Information |
GO to Pinpoint Test C |
| P0643:00 |
Sensor Reference Voltage "A" Circuit High: No Sub Type Information |
GO to Pinpoint Test C |
| P0652:00 |
Sensor Reference Voltage "B" Circuit Low: No Sub Type Information |
GO to Pinpoint Test C |
| P0653:00 |
Sensor Reference Voltage "B" Circuit High: No Sub Type Information |
GO to Pinpoint Test C |
| P0685:00 |
ECM/PCM Power Relay Control Circuit/Open: No Sub Type Information |
GO to Pinpoint Test B |
| P0686:00 |
ECM/PCM Power Relay Control Circuit Low: No Sub Type Information |
GO to Pinpoint Test B |
| P0687:00 |
ECM/PCM Power Relay Control Circuit High: No Sub Type Information |
GO to Pinpoint Test B |
| P0689:00 |
ECM/PCM Power Relay Sense Circuit Low: No Sub Type Information |
GO to Pinpoint Test B |
| P068A:00 |
ECM/PCM Power Relay De-Energized - Too Early: No Sub Type Information |
GO to Pinpoint Test B |
| P0690:00 |
ECM/PCM Power Relay Sense Circuit High: No Sub Type Information |
GO to Pinpoint Test B |
| P06A6:00 |
Sensor Reference Voltage "A" Circuit Range/Performance: No Sub Type Information |
GO to Pinpoint Test C |
| P06A7:00 |
Sensor Reference Voltage "B" Circuit Range/Performance: No Sub Type Information |
GO to Pinpoint Test C |
| P06A8:00 |
Sensor Reference Voltage "C" Circuit Range/Performance: No Sub Type Information |
GO to Pinpoint Test C |
| P06B8:00 |
Internal Control Module Non-Volatile Random Access Memory (NVRAM) Error: No Sub Type Information |
GO to Pinpoint Test B |
| P1793:00 |
Ignition Supply Malfunction >16, <7 volts: No Sub Type Information |
GO to Pinpoint Test B |
| P2510:00 |
ECM / PCM Power Relay Sense Circuit Range/Performance: No Sub Type Information |
GO to Pinpoint Test B |
| U300C:00 |
Ignition Input Off/On/Start: No Sub Type Information |
GO to Pinpoint Test B |