Pinpoint Test AE: U2100:00
WARNING: This page is about a different car, the 2022 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
CHECK the vehicle service history for recent service actions related to this module.
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition GWM U2100:00 Initial Configuration Not Complete: No Sub Type Information Sets due to incomplete or incorrect PMI procedures. Possible Sources
- Incomplete or incorrect PMI procedures.
- AE1 RETRIEVE GWM (GATEWAY MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS)
- Using a diagnostic scan tool, perform the GWM self-test.
Is DTC U2100:00 recorded?
Yes INSTALL As-Built data from PTS following diagnostic scan tool instructions under Module Programming>As-Built. No The system is operating correctly at this time.