| B115E:01 |
Camera Module: General Electrical Failure |
GO to Pinpoint Test A |
| B115E:02 |
Camera Module: General Signal Failure |
GO to Pinpoint Test A |
| B115E:08 |
Camera Module: Bus Signal / Message Failure |
GO to Pinpoint Test A |
| B115E:49 |
Camera Module: Internal Electronic Failure |
GO to Pinpoint Test A |
| B115E:55 |
Camera Module: Not Configured |
Sets on-demand and continuous memory in the BCM when the rear parking aid camera is not configured. Using a diagnostic scan tool, PERFORM the rear parking aid camera configuration. |
| B115E:9A |
Camera Module: Component or System Operating Conditions |
GO to Pinpoint Test A |
| All other Diagnostic Trouble Codes (DTCs) |
-- |
REFER to: Body Control Module (BCM) |