Four-Wheel Drive Systems
- Description And Operation
- Diagnosis And Testing
- Four-Wheel Drive Systems
- Diagnostic Trouble Code (DTC) Chart
- Global Customer Symptom Code (GCSC) Chart
- Symptom Chart
- NVH
- Pinpoint Tests
- Pinpoint Test A: AWD Module Power, Ground, Or Internal Fault
- Pinpoint Test B: Transfer Case Clutch Actuator
- Pinpoint Test C: C00A6:4B
- Pinpoint Test D: C00A6:54
- Pinpoint Test E: C00A6:66
- Pinpoint Test F: C00A7:11, C00A7:13, C00A7:17
- Pinpoint Test G: C00A8:11, C00A8:13, C00A8:17
- Pinpoint Test H: Module Configuration Faults
- Pinpoint Test I: P1001, P1397, P1501, P1705
- Pinpoint Test J: P166E:00
- Pinpoint Test K: Lost Communication With Another Module
- Pinpoint Test L: Invalid Data Received From Another Module
- Pinpoint Test M: Incorrect Torque Transferred To Front Axle After Installing Transfer Case
- Pinpoint Test N: The Transfer Case Does Not Transfer Torque Correctly
- Pinpoint Test O: The Transfer Case Does Not Transfer Torque Correctly
- Pinpoint Test P: Fluid Leak From Transfer Case
- Pinpoint Test Q: Front Axle Binding On Sharp Turns On Dry Pavement
- Pinpoint Test R: Vehicle Shuddering Or Bucking While Driving Or Turning
- Pinpoint Test S: 4WD Temporarily Locked Message Displayed
- Pinpoint Test T: 4WD Temporarily Locked Message Displayed
- Pinpoint Test U: Clicking/Whirring Noise From Transfer Case At Start Up
- Pinpoint Test V: The Transfer Case Makes Noise
- Four-Wheel Drive Systems
- General Procedures
- Removal And Installation