Driver Front Seat Module (DSM): Installation
- To install, reverse the removal procedure.
-
NOTE: This step is only necessary when installing a new component.
Using a diagnostic scan tool, complete the PMI process for the DSM following the on-screen instructions.
-
NOTE: This step is only necessary when installing a new component.
Using a diagnostic scan tool, complete the PMI process for the SCME following the on-screen instructions.
-
NOTE: This step is only necessary when installing a new component.
Operate the seat in all directions through the full range of travel to set soft stops.
-
NOTE: This step is only necessary when installing a new component.
If equipped with memory steering column, operate the steering column in all directions through the full range of travel to set soft stops.