Instrument Panel: Installation
- To install, reverse the removal procedure.
- On installation, make sure the cowl clips are properly aligned to the cowl extension before fully seating the instrument panel in place. The outer fingers must be above, and the lower finger below the cowl extension for proper retention.
- Fill and bleed the cooling system. Refer to: ENGINE COOLING SYSTEM DRAINING, VACUUM FILLING AND BLEEDING
. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding
.
Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding
Refer to: ELECTRIC POWERTRAIN COOLING SYSTEM DRAINING, FILLING AND BLEEDING .