Pinpoint Test Cs: BCMC (Body Control Module C) Concerns
- NOTE: The Inverter System Controller (ISC) is referred to as the SOBDMC (Secondary On-Board Diagnostic Control Module C) in the scan tool.
Normal Operation and Fault Conditions
When specific Diagnostic Trouble Codes (DTCs) are set by the BCMC, corresponding Diagnostic Trouble Codes (DTCs) are also set in the SOBDMC. These Diagnostic Trouble Codes (DTCs) do not indicate a concern with the SOBDMC. To clear the SOBDMC Diagnostic Trouble Codes (DTCs) in question, diagnose the corresponding BCMC concern. REFER to: Body Control Module C (BCMC) .
REFER to: the appropriate Climate Control System - General Information article
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition SOBDMC P0EE3:00 A/C Refrigerant Distribution Valve 'B' Control Circuit/Open: No Sub Type Information An HVAC concern has been identified by the BCMC. To clear this SOBDMCDTC, diagnose the corresponding BCMC concern. SOBDMC P0EE4:00 A/C Refrigerant Distribution Valve 'B' Control Circuit Low: No Sub Type Information An HVAC concern has been identified by the BCMC. To clear this SOBDMCDTC, diagnose the corresponding BCMC concern. SOBDMC P0EE5:00 A/C Refrigerant Distribution Valve 'B' Control Circuit High: No Sub Type Information An HVAC concern has been identified by the BCMC. To clear this SOBDMCDTC, diagnose the corresponding BCMC concern. Possible Causes
- BCMC concerns
Diagnostic steps are not provided for this symptom or DTC. REFER to: DIAGNOSTIC METHODS .