Fuel Pump Driver Module (FPDM): Removal
NOTE:
The fuel pump driver module may be in either of two locations.
NOTE:
The top-frame-mounted fuel pump driver module is on top of the left frame rail, behind the left rear wheel.
NOTE:
The side-frame-mounted fuel pump driver module is on the outside of the left frame rail, under the driver's door.
All Vehicles
- For component location see. Refer to: Fuel Charging and Controls - Component Location .
- With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting
.
Top Frame Mounted Fuel Pump Driver Module
- Remove the left rear splash shield retainer, then position the left rear splash shield out of the way.
- Disconnect the fuel pump driver module electrical connector.
- Remove the fuel pump driver module bolts, then remove the fuel pump driver module.
Side Frame Mounted Fuel Pump Driver Module
- Remove the fuel pump driver module cover retainers, then remove the fuel pump driver module cover.
- Disconnect the fuel pump driver module electrical connector.
- Remove the fuel pump driver module bolts, then remove the fuel pump driver module.