DTC U0415: Invalid Data Received From Anti-Lock Brake System (ABS) Control Module

Failure	Action
00	This DTC sets if the SECM receives invalid data in any of the ABS module messages. Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all ABS module DTCs. REFER to ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL If the diagnostic scan tool cannot communicate with the ABS module, REFER to MODULE COMMUNICATIONS NETWORK (DESCRIPTION & OPERATION) . If no DTCs are set in the ABS module, the concern may be intermittent. SET the ignition to OFF. DISCONNECT and INSPECT all ABS module electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.
81	This DTC sets if the SECM receives invalid data in any of the ABS module messages. Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all ABS module DTCs. REFER to ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL If the diagnostic scan tool cannot communicate with the ABS module, REFER to MODULE COMMUNICATIONS NETWORK (DESCRIPTION & OPERATION) . If no DTCs are set in the ABS module, the concern may be intermittent. SET the ignition to OFF. DISCONNECT and INSPECT all ABS module electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.
82	This DTC sets if the SECM receives invalid data in any of the ABS module messages. Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all ABS module DTCs. REFER to ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL If the diagnostic scan tool cannot communicate with the ABS module, REFER to MODULE COMMUNICATIONS NETWORK (DESCRIPTION & OPERATION) . If no DTCs are set in the ABS module, the concern may be intermittent. SET the ignition to OFF. DISCONNECT and INSPECT all ABS module electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.
83	This DTC sets if the SECM receives invalid data in any of the ABS module messages. Using a diagnostic scan tool, RETRIEVE and DIAGNOSE all ABS module DTCs. REFER to ANTI-LOCK BRAKE SYSTEM (ABS) AND STABILITY CONTROL If the diagnostic scan tool cannot communicate with the ABS module, REFER to MODULE COMMUNICATIONS NETWORK (DESCRIPTION & OPERATION) . If no DTCs are set in the ABS module, the concern may be intermittent. SET the ignition to OFF. DISCONNECT and INSPECT all ABS module electrical connectors and related in-line connectors for corrosion, bent pins, pushed-out pins and spread terminals. REPAIR as necessary.