(Smart Key Buzzer Removal and Installation)
ABBREVIATED PROCEDURE
| Work | H/W | Tightening torque N.m (kgf.m/lb-ft) | SST/Equipment | Chemical | etc | |
|---|---|---|---|---|---|---|
|
||||||
| 1 | Disconnect the 12V battery (-) terminal (Refer to Vehicle Control System - " AUXILIARY BATTERY (12V) ") |
- | - | - | - | - |
| 2 | Remove the front bumper assembly (Refer to Front & Rear Bumper - "FRONT BUMPER ASSEMBLY ") |
- | - | - | - | - |
| 3 | Disconnect the smart key buzzer connector | - | - | - | - | - |
| 4 | Remove the smart key buzzer | - | - | - | - | - |
|
||||||
| Install in the reverse order of removal | - | |||||