Removal and Installation: Removal

WARNING: This page is about a different car, the 2011 Infiniti EX35. However, it is still accessible from the selected car via links, so may be relevant.

Remove the power window main switch finisher (2).
Refer to "EXPLODED VIEW " and "REMOVAL AND INSTALLATION ".
Power window main switch (1) is removed from power window main switch finisher (2) using flat-head screw driver (A) etc.

CAUTION: Do not fold the pawl of power window main switch finisher.

NOTE: The same procedure is also performed for front power window switch (passenger side) and rear power window switch (LH&RH).

Fig 1: Identifying Power Window Main Switch Components

Courtesy of NISSAN MOTOR CO., U.S.A.