LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Isuzu >> 2004 >> Ascender S, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls (Introduction) - 4.2L >> Repair Instructions >> Fuel Filler Hose Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

  1. Remove the fuel fill cap.
    2. Fig 1: View Of Fuel Fill Pipe Housing
    GM730795Courtesy of GENERAL MOTORS CORP.
  2. Remove the fuel fill pipe housing.
    3. Fig 2: Locating Fuel Fill Pipe Bracket Nut
    GM730799Courtesy of GENERAL MOTORS CORP.
  3. Remove the fuel fill pipe bracket nut (2).
  4. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    5. Fig 3: Locating Fuel Fill Pipe Ground Strap Bolt
    GM730802Courtesy of GENERAL MOTORS CORP.
  5. Remove the fuel fill pipe ground strap bolt (3).
    6. Fig 4: Identifying Fuel Pipe/Hose Components
    GM730806Courtesy of GENERAL MOTORS CORP.
  6. Loosen the fuel hose clamp (1).
  7. Separate the fuel hose (2) from the tank.
  8. Cap the open end of the fuel tank.
  9. Remove the push pin fastener (5).
  10. Remove the fuel filler pipe from the vehicle.
scientia non olet · About LEMON Manuals