Sensor-Brake Fluid Level: Installation

WARNING: This page is about a different car, the 2006 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Fluid Level Switch Removal/Installation

Courtesy of DAIMLERCHRYSLER CORP.

1 - FLUID LEVEL SENSOR

2 - RESERVOIR

Install the sensor (1) with a new o-ring into the reservoir (2) until the locking tabs are engaged.

Fig 2: Fluid Level Switch
Courtesy of DAIMLERCHRYSLER CORP.

1 - RESERVOIR

2 - FLUID LEVEL SENSOR
Install the wire connector to the fluid level sensor (2).