LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2009 >> Sorento Base, A5SR2 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Engine Control System - 2.4L) >> Accelerator Position Sensor (APS) >> Repair Procedures >> Component Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Inspection

WARNING: This page is about a different car, the 2009 Kia Optima and 2009 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect a scan tool to the Diagnosis Link Connector (DLC).
  2. Start engine and check output voltages of APS 1 and 2 at C.T and W.O.T.

    Specification:  Refer to SPECIFICATION .

  3. Turn ignition switch OFF and disconnect the scan tool from the DLC.
  4. Disconnect APS connector and measure resistance between APS terminals 4 and 5 (APS 1).

    Specification:  Refer to SPECIFICATION .

  5. Disconnect APS connector and measure resistance between APS terminals 1 and 6 (APS 2).

    Specification:  Refer to SPECIFICATION .

scientia non olet · About LEMON Manuals