LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2015 >> Sorento EX, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Transfer Assembly >> Transfer Fluid >> Repair Procedures >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Inspection

Information 

  1. Remove the under cover.

    (Refer to "ENGINE ROOM UNDER COVER for 2.4L or ENGINE ROOM UNDER COVER for 3.3L")

  2. Remove the oil filler plug (A).

    [Gasoline 2.4] 

    Fig 1: Oil Filler Plug (Gasoline 2.4)
    G09765657Courtesy of KIA MOTORS AMERICA, INC.

    [Gasoline 3.3] 

    Fig 2: Oil Filler Plug (Gasoline 3.3)
    G09765658Courtesy of KIA MOTORS AMERICA, INC.
  3. Check the oil level.

    Information 

    Oil level must be up to fill the hole, if not, add oil until it runs over.

    Fig 3: Oil Level
    G09765659Courtesy of KIA MOTORS AMERICA, INC.
  4. Install the oil filler plug with new gasket.

    Tightening torque:  39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

  5. Install the under cover.

    (Refer to "ENGINE ROOM UNDER COVER for 2.4L or ENGINE ROOM UNDER COVER for 3.3L")