LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Kia >> 2016 >> Forte EX >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Control System - 1.8L) >> Variable Intake Solenoid (VIS) Valve >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the variable intake solenoid valve connector (A).
  3. Disconnect the vacuum hoses (B) from the valve.
  4. Remove the installation nut, and then remove the valve from the surge tank.
Fig 1: Locate Variable Intake Solenoid Valve Connector
G11793895Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals