ABS Warning Indicator

WARNING: This page is about a different car, the 2013 Land Rover LR4, 2012 Land Rover LR4, 2011 Land Rover LR4, and 2010 Land Rover LR4. However, it is still accessible from the selected car via links, so may be relevant.

The anti-lock brake system (ABS) warning indicator is an amber colored indicator located between the coolant temperature gage and the fuel level gage.

The anti-lock brake system (ABS) warning indicator is continuously illuminated if there is a fault that affects anti-lock brake system (ABS) performance or causes the anti-lock brake system (ABS) function to be disabled.

Operation of the anti-lock brake system (ABS) warning indicator is controlled by a high speed controller area network (CAN) bus message from the anti-lock brake system (ABS) module to the instrument cluster.

When the ignition switch is first turned to position II, the anti-lock brake system (ABS) warning indicator illuminates for approximately 3 seconds as a bulb check. During the bulb check, if a fault is stored in the memory of the anti-lock brake system (ABS) module, the anti-lock brake system (ABS) warning indicator goes off for 0.5 second, 0.5 second after the start of the bulb check. If a fault during the previous ignition cycle caused the anti-lock brake system (ABS) warning indicator to be illuminated, the anti-lock brake system (ABS) warning indicator may remain illuminated after the next bulb check, even if the fault has been rectified and cleared from the anti-lock brake system (ABS) module; the anti-lock brake system (ABS) warning indicator remains illuminated until vehicle speed reaches 15-20 km/h (9.5-12.5 mph) while additional checks of the related inputs are performed.