Neutral Start Switch
Neutral start switch is located on side of transaxle. Turn ignition off. Disconnect neutral start switch connector. See Fig 1. Using a DVOM, check for continuity between terminals specified in the NEUTRAL START SWITCH CONTINUITY table. If continuity is not as specified, replace neutral start switch.
NEUTRAL START SWITCH CONTINUITY
| Range | Continuity Between Terminals |
|---|---|
| P | B & N |
| P | RB & PL |
| R | RB & RL |
| N | B & N |
| N | RB & NL |
| D | RB & DL |
| 2 | RB & 2L |
| L | RB & LL |