Shift Cable Adjust
- If shift indicator is not aligned with correct position, adjustment is necessary. On ES250, remove left engine undercover. On all models, loosen nut on transmission-mounted shift lever linkage under vehicle. On ES250, push transmission-mounted shift lever fully toward right side of vehicle. On LS400, push transmission-mounted shift lever fully rearward.
- On all models, move transmission-mounted shift lever back to Neutral position. Move in-car shift lever to neutral position. While holding in-car shift lever toward "R" position, tighten shift lever nut. Start engine and ensure shift lever operates properly. On ES250, install left engine undercover.