Power Mirror Motor Test
Disconnect power mirror motor harness connector. Using a 12-volt power source, connect positive and negative leads to specified terminals. See appropriate POWER MIRROR MOTOR TEST table. See Figure. If power mirror motor fails any test, replace power mirror assembly.
POWER MIRROR MOTOR TEST
| Apply 12 volts To Pin No. (1) | Ground (1) Pin No. | Mirror Operation | ||
|---|---|---|---|---|
| 2 (2) | 3 (1) | Up | ||
| 3 (1) | 2 (2) | Down | ||
| 4 (3) | 3 (1) | Left | ||
| 3 (1) | 4 (3) | Right | ||
|
||||