Repair and Diagnosis: Electrical: Starter: Overhaul

NOTE: Overhaul procedures are not available from manufacturer. See Fig 1 and STARTER OVERHAUL SPECIFICATIONS  table.

Fig 1: Exploded View of Reduction Gear Starter

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

STARTER OVERHAUL SPECIFICATIONS

Application	Specification
Brush Length	.374" (9.5 mm)
Brush Spring Tension	6.0-7.3 Lbs. (2.7-3.3 Kg)
Commutator Diameter (Minimum)	1.339" (34.0 mm)
Commutator Run-Out (Maximum)	.002" (.05 mm)